⚡ 60W JPT M7 MOPA
🔬 Imported Seed + Pump Diodes
🛡 3-Year Full Warranty
🎁 $500+ Free Gifts Included
Free Shipping
DDP to US, CA, EU
Motorized Z-Axis
500mm travel
3-Year Warranty
Source + machine
M2 < 1.5
Near-single mode
Color Marking
Full MOPA control
60W JPT M7 M-Version Fiber Laser - Imported Components for Industrial Reliability
This is the premium 60W MOPA fiber laser built around JPT's top-tier M7 source with imported seed and pump diodes sourced from Canada and France. Where the economy E-series versions use domestically manufactured internals, the M-version (YDFLP-60-M7-M-R) is engineered for shops that run production shifts, need consistent output hour after hour, and want the longest possible source lifespan. At $6,200, it sits between our $4,400 EM7 best seller and the $6,500 80W M7, giving you industrial-grade component pedigree at 60W power without stepping up to water cooling.
Five Reasons Shops Choose the M-Version
1
Imported Seed and Pump Diodes for Long-Term Stability
The YDFLP-60-M7-M-R uses seed diodes and pump diodes sourced from suppliers in Canada and France rather than domestically manufactured components. This translates to tighter output consistency across thousands of hours of continuous operation, which matters when you are running production shifts where every mark needs to match the one before it.
2
2.0 mJ Pulse Energy for Effective Deep Engraving
Maximum pulse energy of 2.0 mJ gives this source genuine material removal capability. Deep engraving on stainless steel, hardened tool steel, titanium, and brass is practical at 60W, not just theoretically possible. Combined with adjustable pulse width from 2 to 500 nanoseconds, you control exactly how much energy hits the material per pulse.
3
Full MOPA Color Marking on Stainless and Titanium
Independent control of pulse width and frequency is what separates MOPA sources from fixed-pulse Q-switched lasers. By adjusting pulse width (2 to 500 ns) and frequency (1 to 4,000 kHz) independently, you generate a controlled oxide layer on stainless steel and titanium surfaces. The result is permanent, vibrant color marks - blues, golds, reds, purples, greens - without ink, paint, or any consumable material.
4
Air Cooled - No Chiller Required
At 60W, the M7 M-version stays air cooled with total power consumption under 250W. No water chiller to maintain, no distilled water to monitor, no hose connections to worry about. Plug it in, turn it on, and start marking. This keeps the total footprint compact and the ongoing maintenance minimal compared to water-cooled models at 80W and above.
5
Motorized Z-Axis with 500mm Travel
The heavy-duty motorized Z-tower lets you adjust focal height with button controls instead of manually cranking the head up and down. 500mm of vertical travel accommodates everything from flat plates sitting on the worktable to tall parts positioned below the lens. Pair it with the included rotary attachment and you can position rings, cylinders, and oddly shaped parts at the correct focal distance without guesswork.
Technical Specifications
| Parameter | Specification |
|---|---|
| Laser Source | JPT YDFLP-60-M7-M-R (M-version) |
| Laser Type | MOPA Pulsed Fiber Laser |
| Average Output Power | 60W |
| Maximum Pulse Energy | 2.0 mJ |
| Pulse Width Range | 2 to 500 ns (17 preset waveforms) |
| Frequency Range | 1 to 4,000 kHz |
| Wavelength | 1064 nm |
| Beam Quality (M2) | Less than 1.5 |
| Output Power Stability | Less than 5% |
| Peak Power | Over 10 kW |
| Cooling Method | Air cooled |
| Power Supply | 24V DC |
| Total Power Consumption | Less than 250W |
| Galvo Scanning Head | SG7110 |
| Standard Marking Area | 110 x 110 mm |
| Available Lens Sizes | 70x70, 110x110, 150x150, 175x175, 210x210, 300x300 mm |
| Z-Axis | Motorized, 500 mm travel |
| Software | EZCad 2 Original (LightBurn compatible) |
| Red Pilot Laser | Built-in (R designation) |
| Upgrade Options | 2.5D (EZCad 3, +$700) or 3D (Feeltek, +$5,300) |
Common Questions Before Buying
How is this different from the $4,400 EM7?
Same MOPA architecture, same pulse width range, same frequency range, same 2.0 mJ pulse energy. The difference is internal component sourcing. The M-version uses imported seed and pump diodes from Canada and France. The EM7 uses domestically manufactured equivalents. For daily production, the output is identical. The M-version is the pick if you are running extended shifts and want the highest long-term source stability.
Can it cut metal?
It can cut very thin metals - foil and sheet up to approximately 0.5 mm depending on the alloy. For anything thicker, you need 100W or more. For production sheet cutting, a CNC fiber laser cutter is the right tool.
Is 60W enough for deep engraving?
Yes. 60W with 2.0 mJ pulse energy is the minimum practical power level for regular deep engraving work on metals. It will not match the speed of a 100W or 200W machine on deep relief work, but it handles most engraving depth requirements for jewelry, tags, molds, and industrial parts without issue.
Does it need a dedicated electrical circuit?
No. The total power consumption is under 250W, which is comparable to a desktop computer. A standard 110V outlet handles it without any electrical modifications.
What about color marking - how many colors?
The number of distinct colors depends on pulse width and frequency combinations. On 304 stainless steel, operators typically achieve 5 or more distinct colors including black, gold, blue, red, and purple. Titanium produces colors more easily than stainless. Each color requires dialing in specific parameter combinations.
Can I mark plastics with it?
Yes, on certain plastics. MOPA sources handle ABS, POM (Delrin), nylon, and some engineering plastics well using short pulse widths. Acrylic and clear plastics do not respond to the 1064 nm wavelength. For heat-sensitive plastics or medical applications, a UV laser is the better choice.
Honest Disclosure - What This Machine Cannot Do
- Cannot mark tumblers or coated drinkware - use a CO2 galvo laser for that
- Cannot engrave wood, leather, or paper - those materials need CO2 wavelength (10,600 nm)
- Cannot drill or cut glass - glass drilling requires the JPT M8 series with G3 PRO 2.5D galvo
- Cannot replace a CNC fiber laser cutter for sheet metal work - galvo machines are markers with limited cutting ability
- Deep engraving will be slower than 100W or higher power machines - 60W is the practical minimum, not the fastest option
- Cannot mark clear acrylic - the 1064 nm infrared wavelength passes through transparent materials
What Ships With Your Machine
- JPT YDFLP-60-M7-M-R laser source (M-version)
- SG7110 galvo scanning head
- Motorized Z-axis tower (500 mm travel)
- 2 F-theta lenses (your choice of sizes)
- Rotary attachment (D60, D80, or D100 - your choice)
- Safety glasses (OD5+ rated for 1064 nm)
- EZCad 2 Original software with pre-configured settings
- Foot pedal switch for hands-free operation
- All cables, USB drive, and complete documentation
- LightBurn compatibility built in
Frequently Asked Questions
The JPT naming convention uses a prefix letter to indicate the component tier. The model code YDFLP-60-M7-M-R has no "E" or "E2" prefix, which means it uses JPT's top-tier internal components - specifically imported seed diodes and pump diodes from suppliers in Canada and France. The E-series (YDFLP-E-60-M7-M-R) and E2-series (YDFLP-E2-60-M7-M-R) use domestically sourced equivalents for those same components. All three share the same M7 MOPA architecture, the same pulse width range, the same frequency range, and the same external specifications. The M-version is JPT's professional industrial-grade tier.
If you are starting a side business, running occasional production, or building up your volume, the $4,400 EM7 delivers identical marking results for most jobs. Choose the M-version at $6,200 if your machine will run extended production shifts, if you need maximum source longevity over many thousands of operating hours, or if you simply want the highest-tier components available at 60W. Both carry the same 3-year warranty from Haotian.
The 2.5D upgrade (EZCad 3 with dynamic focus head, +$700) and 3D upgrade (Feeltek scanning head, +$5,300) are configured at the time of order. These are not field-upgradable after delivery because they require different galvo hardware and controller boards. If there is any chance you will need to mark on curved surfaces, angled parts, or do relief engraving on contoured shapes, select the upgrade when ordering.
The 1064 nm fiber wavelength marks all metals: stainless steel, titanium, aluminum (bare and anodized), brass, copper, tool steel, hardened steel, gold, silver, and most alloys. It also handles certain engineering plastics like ABS, POM, nylon, and polycarbonate at short pulse widths. It does not work on wood, leather, glass, paper, or transparent materials - those need CO2 or UV wavelengths.
The M7 source contains 17 factory-programmed pulse waveforms: CW (continuous wave), 2 ns, 4 ns, 6 ns, 9 ns, 13 ns, 20 ns, 30 ns, 45 ns, 60 ns, 80 ns, 100 ns, 150 ns, 200 ns, 250 ns, 350 ns, and 500 ns. You select the waveform in EZCad 2 or LightBurn, and the source shapes each pulse to that exact profile. Short pulse widths (2 to 13 ns) deliver high peak power for color marking and fine detail. Longer pulse widths (100 to 500 ns) are used for surface annealing, deep engraving, and broader heat-affected zones.
Yes. LightBurn's Galvo edition runs on both Windows and macOS. This is the route for Mac users since EZCad 2 is Windows-only. Note that you specifically need the LightBurn Galvo edition, not the standard gantry version. The machine ships with a JCZ control board that LightBurn developers have tested and validated for galvo-operated fiber lasers.
Shipping to the US, Canada, and EU is free DDP (Delivered Duty Paid), which means the price you see is the price you pay - zero customs fees, zero import duties, zero surprises at delivery. Delivery takes approximately 30 days because every machine is built to order. For all other countries worldwide, shipping is free CIF (approximately 12 to 14 days), and the customer handles duties and import taxes at their local customs office.
JPT rates their M7 fiber laser sources for approximately 100,000 hours of operation. In practice, most production shops will never reach that number within the useful life of the machine. The M-version's imported pump and seed diodes are selected for consistent output degradation curves, meaning the source loses power gradually and predictably over time rather than dropping off suddenly. Haotian's 3-year warranty covers the source and the complete machine.
🛡 3-Year Warranty + Lifetime Support
Every Haotian 60W M7 M-version is covered by a full 3-year warranty on both the JPT laser source and the complete machine. If any part fails due to a quality defect during the warranty period, Haotian ships the replacement part to you at no cost - and the broken part stays with you. Source defects are handled through JPT's manufacturer warranty, with Haotian covering shipping both ways. After the warranty period, lifetime email support continues at info@haotianlasers.com.
🚚 Free Shipping Worldwide
US, Canada, EU: Free DDP shipping (Delivered Duty Paid). The price on this page is everything you pay. No customs fees, no import duties, no hidden charges. Delivery takes approximately 30 days.
All other countries: Free CIF shipping worldwide. Delivery takes approximately 12 to 14 days. The customer is responsible for duties and import taxes at their local customs office.
Every machine is built to order. Production and quality testing are included in the shipping timeline.
Compare Other Power Levels
Ready to Order Your 60W M7 M-Version?
Select your lens sizes and rotary above, then add to cart.
Questions? Email us at info@haotianlasers.com
Reviews
There are no reviews yet.