🚀 Affordable Entry
⚡ 30W JPT EM7 MOPA
🎨 Color Marking
🛡️ 3-Year Warranty
Free DDP Shipping
US, Canada, EU. Duties paid
Free Gifts Included
Lens, rotary, glasses, more
MOPA Color
Steel and titanium spectrum
3-Year Warranty
Source plus full machine
Air Cooled
No chiller needed
Your First Real Fiber Laser
30W JPT EM7 MOPA Fiber Laser for Marking and Color Engraving
Why This Is the Right First Fiber Laser
The 30W EM7 gives you full MOPA color marking on stainless steel and titanium at the lowest entry price in our fiber laser range, meaning you can launch a personalization business or production line without committing five-figure capital up front. The compact air-cooled design fits on a standard workbench in any small workshop, garage, or home studio without requiring chillers, three-phase power, or special ventilation. And because it shares the same JPT MOPA architecture as our larger machines, the skills and settings you learn here translate directly when you upgrade to higher power later, making this the easiest on-ramp to professional fiber laser ownership.
This is the machine for anyone who is starting their first fiber laser business or hobby and wants real MOPA capabilities without spending money on industrial-grade power they will not use for years. It is also the right choice for established shops adding a second machine for fast small-part marking when their main fiber laser is busy with bigger jobs.
The 30W EM7 is built around the JPT EM7 MOPA source, the same MOPA architecture used in our 60W best seller and our 200W production machines, just sized for entry-level work. It includes EZCad 2 software, full LightBurn compatibility, an air-cooled design, and all the accessories you need to start engraving on day one.
What Makes It Right for Beginners
Five Reasons This Is the Best First Fiber Laser
1
Real MOPA Color Marking, Not a Stripped-Down Q-Switch
Many entry-level fiber lasers cut costs by using basic Q-switched sources that cannot do color marking. The 30W EM7 uses a full MOPA architecture with adjustable pulse width from 1 to 500 nanoseconds and frequency from 1 to 4,000 kHz, the same independent control that professional jewelry shops use to produce vivid colors on stainless steel. You learn real fiber laser techniques from day one, not workarounds for missing features.
2
Air-Cooled Design Fits Any Small Workshop
At 30W, the JPT EM7 source produces minimal thermal load compared to higher-power machines. No water chiller required, no plumbing, no ventilation modifications. The complete machine runs on standard single-phase power and fits comfortably on a workbench in any garage, basement, home office, or small commercial space. Setup and operation feel like a standard piece of shop equipment, not an industrial installation.
3
JPT Brand Source Even at Entry Level
This machine uses a genuine JPT EM7 MOPA source, the same brand used in production-grade fiber lasers worldwide. JPT is the leading fiber laser source manufacturer in China and the source you find inside professional machines used in jewelry production, electronics marking, and automotive parts manufacturing. You are not buying a generic source rebranded under a low-cost label. The component lifespan is rated at over 100,000 operating hours, meaning the source will outlast almost any other component on the machine.
4
EZCad 2 Plus LightBurn Means No Software Lock-In
The machine ships with EZCad 2, the standard control software for fiber laser galvo systems. It also works with LightBurn galvo mode on Windows, macOS, and Linux. If you already use LightBurn for a CO2 or diode laser, you can manage this machine in the same interface you already know. If you prefer EZCad, that works too. No proprietary software, no licensing tricks, no upgrade fees.
5
Skills That Transfer to Larger Machines
The JPT EM7 MOPA architecture you learn on this 30W machine is the same architecture used in our 60W EM7, 100W M7, 120W M7, and 200W M7 machines. Settings, parameters, and techniques transfer directly when you eventually upgrade. You are not learning a one-off control system that becomes obsolete the moment your business grows. This is the safest entry investment because the knowledge and workflow scales with you.
Where 30W Shines
What This Machine Does Best
The 30W EM7 is optimized for surface marking, color marking, fine detail work, and small to medium production runs on metals and select plastics. Here are the applications where it performs at its best.
Jewelry and Rings
Engraving names, dates, and patterns inside and outside rings, pendants, charms, and small metal jewelry pieces. Use the rings rotary attachment for clean curved engraving.
Dog Tags and Pet ID
Mass production of pet ID tags, military-style dog tags, and personalized name tags with deep, permanent marks that last the lifetime of the metal.
Color Marking on Steel
MOPA color marking on stainless steel for logos, photos, gradient designs, and rainbow effects. Real MOPA pulse control for vivid color reproduction.
Keychains and Small Gifts
Personalized keychains, custom luggage tags, business card-sized metal items, and bulk corporate gifts. Foot pedal supports hands-free batch production.
Tool and Part Marking
Asset tracking marks on shop tools, serial numbers on small parts, identification labels on machinery components. Permanent and tamper-resistant.
Watch Parts and Accessories
Engraving watch backs, watch bands, buckles, and accessory hardware with the precision needed for small detailed work.
Stainless Cutlery and Cookware
Personalized engraving on stainless steel knives, spoons, and metal kitchenware. Color marking adds visual interest to plain stainless surfaces.
Etsy and Online Sellers
Small batch personalization for online shop businesses. The compact footprint and low power requirements make this ideal for home-based fulfillment operations.
Anodized Aluminum Cases
Removing anodized coatings from aluminum to reveal high-contrast white text and graphics. Phone cases, tool handles, drink bottles, and other anodized items.
Be Honest: What 30W Cannot Do Well
- Metal cutting. 30W is too low for meaningful sheet metal cutting. Even thin foil cutting is slow and inconsistent. If cutting is part of your work, you need at least 100W and ideally a dedicated CNC fiber laser cutter.
- Fast deep engraving. The 30W can engrave deep into metal but it takes significantly longer than a 60W or 100W machine. If deep engraving is your primary work, the 60W EM7 best seller at $4,400 is a much better choice.
- Glass marking or drilling. Standard fiber lasers cannot interact with glass at any power level. For glass work you need a UV laser or a JPT M8 source with the G3 PRO 2.5D galvo.
- Heavy industrial production volume. The 30W is designed for small to medium batches, not 24-hour-a-day continuous production. For high-volume production, look at our 100W or 200W machines.
Technical Data
Complete Specifications
| Laser Source | JPT EM7 MOPA (genuine JPT brand) |
| Average Output Power | 30W |
| Maximum Pulse Energy | 1.0 mJ |
| Pulse Width Range | 1 to 500 ns (independently adjustable, full MOPA) |
| Pulse Frequency Range | 1 to 4,000 kHz (independently adjustable) |
| Wavelength | 1064 nm |
| Beam Quality (M2) | Less than 1.8 |
| Cooling System | Air cooled (no chiller required) |
| Galvo Scanning Head | Sino-Galvo high-speed scanner |
| Standard Working Area | 110 x 110 mm |
| Optional Working Areas | 70x70, 150x150, 175x175, 200x200, 300x300 mm |
| Lens Type | Standard F-theta |
| Z-Axis | Manual or motorized (configuration option) |
| Controller | EZCad 2 with JCZ control board |
| Software Compatibility | EZCad 2, LightBurn (Windows, macOS, Linux) |
| Supported File Formats | AI, DXF, PLT, BMP, JPG, PNG, SVG, SHX, TTF |
| Power Supply | 110V to 240V, 50 to 60 Hz (single phase) |
| Source Lifespan | Over 100,000 hours rated operation |
| Body Material | 100% aluminum (custom colors available) |
| Color Marking on Stainless Steel | Yes, full MOPA spectrum |
| Color Marking on Titanium | Yes, full MOPA spectrum |
| Plastic Marking with MOPA | Yes, on select plastics (ABS, POM, anodized coatings) |
| Metal Cutting Capability | Not recommended (use 100W or higher) |
| Deep Engraving Capability | Yes, but slower than 60W or higher |
| Warranty | 3 years on laser source and complete machine |
| Shipping | Free DDP worldwide (US, Canada, EU in approximately 30 days) |
First-Time Buyer Concerns
The Real Questions Beginners Ask
Buying your first fiber laser feels like a big commitment. Here are the practical concerns we hear most often from first-time buyers, and what the answers look like on this specific machine.
How Long Until I Can Make My First Mark?
Same day, usually within an hour of unboxing. The machine arrives pre-assembled. You connect power, install EZCad 2 from the included USB drive, place a test piece of metal under the lens, focus with the red dot, and run the included sample job. Most first-time buyers are making their first marks within 60 minutes.
I Already Use LightBurn With My CO2 Laser
Use the same LightBurn for this machine. The JCZ control board is fully recognized by LightBurn galvo mode. You will need to enable galvo features in your LightBurn license, but the interface, file formats, and workflow you already know all transfer. No need to learn a new program from scratch.
Do I Need Special Electrical or Ventilation
Standard household power and basic ventilation. The 30W runs on regular 110V to 240V single-phase power with no special wiring. Air cooling means no chiller plumbing. You will want basic fume extraction for the small amount of vaporized material during marking, but a simple fume extractor or open window is enough for most home and small shop setups.
Will I Outgrow It Quickly?
Honest answer: it depends on your work. If you stick with surface marking, color marking, jewelry, and small parts, the 30W can serve you for years. If you discover deep engraving or cutting work in your business, you will want to add a 60W EM7 or 100W M7 within 6 to 12 months. Many shops keep both: the 30W for fast small-part marking and a larger machine for production work.
What If Something Breaks on My First Machine?
3 years of full warranty coverage with all shipping paid. Failed non-source components ship to you free with no return required. Laser source or galvo defects are repaired or replaced through warranty with all freight covered. We answer email forever, even after the warranty period.
Is the JPT EM7 the Same Quality as the M7?
Same MOPA technology, different internal grade. Both EM7 and M7 are real JPT MOPA sources. The M7 uses imported seed and pump diodes for maximum long-term stability in continuous production environments. The EM7 uses standard internal components, which is perfect for entry-level use but not optimal for 24-hour-a-day operation. For your first fiber laser, the EM7 is the right choice.
In the Box
Everything You Need to Get Started
Even at the entry-level price, this machine ships with a complete starter package. Nothing important is sold separately or charged as an upgrade.
JPT EM7 30W MOPA laser source with full pulse width and frequency control, over 100,000 hours rated lifespan, air cooled.
Sino-Galvo high-speed scanning head with red dot focus positioning for accurate workpiece alignment.
Standard 110 x 110 mm F-theta lens with optional sizes available at order: 70x70, 150x150, 175x175, 200x200, or 300x300 mm.
Rotary attachment in your choice: D60 mini for rings and small jewelry, or D80/D100 for tumblers and cylindrical objects.
EZCad 2 software with pre-configured settings for common materials and operations.
LightBurn compatibility built in for users who prefer LightBurn galvo mode on Windows, macOS, or Linux.
Foot pedal switch for hands-free production batch operation.
Safety glasses (OD5+) rated for 1064 nm fiber laser eye protection.
Fixed aluminum worktable and 100% aluminum machine body with custom color options available at order.
All cables, USB drive with software, sample materials, and documentation needed for installation and operation.
Detailed Questions
Frequently Asked Questions
Is 30W enough for a serious business or just a hobby?
Both, depending on what you make. If your business is jewelry engraving, dog tags, keychains, small personalized gifts, or color marking on stainless steel, 30W handles real production work for years. Many successful Etsy shops and side businesses run on 30W fiber lasers. If your work involves deep engraving on thicker metals, fast cutting, or high-volume industrial output, you should look at the 60W EM7 or higher. The 30W is perfect for a starting business that primarily does surface marking and color work.
What is the difference between EM7 and Q-switched fiber lasers at this price level?
Q-switched fiber lasers are cheaper but cannot produce colors on stainless steel or titanium because their pulse width is fixed. They are also limited in the range of plastics and coated materials they can handle. The EM7 is a full MOPA laser with adjustable pulse width from 1 to 500 nanoseconds, which is the only way to produce real color marking and the only way to mark heat-sensitive materials cleanly. If color marking matters to your business, do not buy a Q-switched fiber laser at any price.
Can it really do color marking on stainless steel at only 30W?
Yes. Color marking on stainless steel is created by adjusting pulse width and frequency to control how the laser oxidizes the surface, not by raw power. The 30W EM7 has the full MOPA pulse control range (1 to 500 ns pulse width, 1 to 4000 kHz frequency) needed for the complete color spectrum. Higher power machines mark colors faster, but the 30W produces the same vivid colors at slower speed. Perfect for jewelry, awards, and personalized gifts.
What plastics can the 30W EM7 mark?
MOPA fiber lasers can mark certain plastics that respond to 1064 nm wavelength: ABS, POM (Delrin), some nylons, anodized coatings on aluminum, and dark or filled polymers. Clear plastics like acrylic do not work because the IR beam passes through. For most plastic marking work, a UV laser gives better results, but for the specific plastics that respond to fiber, the EM7 produces clean marks at low pulse width settings.
Can I do deep engraving with a 30W?
Yes, but slower than higher power machines. Deep engraving on metals works at 30W by running multiple passes. A deep mark that takes 2 minutes on a 60W might take 4 to 5 minutes on a 30W. If you only do occasional deep engraving, this is acceptable. If deep engraving is a daily part of your work, the 60W EM7 at $4,400 will pay for itself quickly in time savings.
Why is this machine air cooled instead of water cooled?
30W produces low enough thermal load that air cooling handles it without issue. Water cooling becomes necessary above approximately 100W where heat dissipation exceeds what air convection can handle. Air cooling at this power level means no chiller, no plumbing, no maintenance, and no extra noise. The machine fits in any small workshop without modifications.
Does it work with LightBurn?
Yes, fully. The JCZ control board is recognized natively by LightBurn galvo mode on Windows, macOS, and Linux. You will need to enable galvo features in your LightBurn license. EZCad 2 is also included for users who prefer it. Both work, no licensing tricks required.
Should I buy the 30W EM7 or save up for the 60W EM7?
If your work is surface marking, color marking, jewelry, dog tags, and small parts, the 30W is enough and saves you money. If you plan to do regular deep engraving or larger production volumes, the 60W EM7 at $4,400 is the better investment because it handles a wider range of work and will not become a bottleneck as quickly. Both machines use the same MOPA architecture and the same EZCad workflow, so the learning curve is identical.
After You Buy
3-Year Warranty and Lifetime Email Support
Even at our entry-level price, the 30W EM7 carries the same 3-year warranty as our flagship machines, covering both the JPT laser source and the complete machine.
Free replacement parts for 3 years. Non-source components that fail due to manufacturing defects ship to you at no cost. The broken part stays with you. Haotian pays all shipping.
JPT laser source warranty. Defective laser sources must be returned for repair or replacement under JPT warranty. Haotian arranges everything and pays both ways.
Galvo head coverage. Same return process. Defective scanning heads are repaired or replaced through warranty at no cost to you.
Lifetime email support for first-time buyers. Reach our team at info@haotianlasers.com for setup help, settings advice, troubleshooting, and operation questions. We help beginners learn the machine.
50,000+ member Facebook community where beginners and professionals share settings, project photos, and troubleshooting tips daily.
Delivery
Free Worldwide Shipping
The 30W EM7 ships free worldwide. For customers in the United States, Canada, and the European Union, we use DDP shipping (Delivered Duty Paid) which includes all customs duties, import taxes, and brokerage fees in the price. The amount you pay at checkout is the total cost. Estimated delivery is approximately 30 days from order. Faster CIF shipping is available worldwide for delivery in approximately 12 days.
Other Power Levels
Browse the Full Range
Start Your Fiber Laser Journey
The 30W JPT EM7 is the affordable entry to real MOPA color marking and professional fiber laser engraving. JPT brand source, LightBurn compatible, 3-year warranty, and free DDP shipping with duties paid.
Questions? info@haotianlasers.com · Contact Page
Haotian Laser, 6191 Sherman Rd, Saginaw, MI 48604 · About Us
Reviews
There are no reviews yet.