20W JPT M8 MOPA
Only 9.9 kg
Single-Piece Build
Portable Counter Laser
The countertop fiber laser
20W JPT M8 Portable Fiber Laser for Shop Counters and Sales Desks
A complete fiber laser that weighs only 9.9 kg and sits right on your sales desk. Built around the genuine JPT YDFLP-20-M8-S-R MOPA source, air cooled and powered from a normal wall outlet. Made for jewelry stores, gold shops, gift shops, pet shops, watch repair counters and market stalls that want to engrave while the customer waits.
Why this machine pays for itself
Personalized engraving turns every walk-in customer into a higher margin sale. A jewelry or gold shop adding names to rings and pendants, a pet shop engraving ID tags, a gift shop putting initials on lighters, pens and money clips can charge $20 to $80 per piece for a job the laser finishes in seconds.
The 20W M8 needs only a small corner of your counter, runs from a standard outlet and marks with a near single mode beam, M² 1.4. Small machine, big margin.
Free Shipping
DDP to US/Canada/EU
1.1 mJ Pulse
JPT M8 MOPA source
9.9 kg Total
Single-piece build
100 to 240 V
Plug and play adapter
3-Year Warranty
Source and machine
Why this machine
Five reasons buyers choose the 20W M8
Compact does not mean compromise. This is the same JPT M8 architecture used in our 120W and 200W glass-drilling flagships, scaled down for retail, mobile, and bench-top operation.
01
Smallest M8 in the lineup
9.9 kg total, single-piece chassis
The laser source weighs only 2.7 kg and has the marking control card built in, with a USB type C port for your laptop. The complete machine with galvo head and worktable comes in under 10 kilograms. No separate control box and no chiller. Lift it onto a counter, into a car trunk or onto a market table without help.
02
Real M8 beam quality
M² 1.4 beam, 2 to 500 ns pulse control
The JPT YDFLP-20-M8-S-R is a true MOPA source. Pulse width is adjustable from 2 to 500 ns and frequency from 1 to 4000 kHz, set independently. That is what makes real color marking on stainless steel and titanium possible, plus clean black marks and fine detail on small jewelry.
03
Plug into any outlet
Universal 100 to 240 V air-cooled operation
The JPT source draws less than 120 watts and comes with a 100 to 240 V power adapter. No three phase wiring, no chiller, no dedicated circuit and no special ventilation. Plug it into the same outlet as your point of sale system and start engraving.
04
Designed for retail presentation
Quiet, clean, customer-facing operation
Air-cooled means no chiller pump noise. The single-piece chassis looks like a finished retail appliance, not a workshop tool. Show customers their engraving in real time as a closing technique. The 1.1 mJ pulse energy produces crisp, repeatable marks on jewelry sized pieces in seconds.
05
M8 series advantage
Glass marking capability built in
The M8 source produces the high peak power and brightness needed to interact with glass surfaces. The 20W is not a glass drilling production machine, but the architecture supports surface marking on borosilicate, soda lime, and quartz glass. For shops that occasionally need to mark glass perfume bottles, awards, or wine bottles, this capability comes built in.
Compact Source
A laser source smaller than a shoebox
The JPT 20W M8 source module measures only 272 × 105 × 76 mm and weighs 2.7 kg, with the control card built in. That is why the complete machine stays at 9.9 kg and fits on a sales desk where bigger fiber lasers do not.
272
mm length
10.7 inches
105
mm width
4.1 inches
76
mm height
3.0 inches
Who buys this machine
Built for shops that sell from the counter
If your customers stand at a counter and want something personalized, this machine belongs there.
Jewelry stores
Same day names, dates and symbols on rings, pendants, bracelets and watch backs. A strong closing tool that lifts the average ticket.
Gold and silver shops
Mark gold bars, coins, chains and silver items with logos, weights and serial numbers right at the desk.
Gift shops
Personalize lighters, pens, knives, money clips, keychains and dog tags. Walk in to walk out in minutes.
Pet shops
Engrave pet ID tags with names and phone numbers while the owner waits. Small tags, quick jobs, repeat customers.
Watch repair counters
Caseback messages, dedications and service marks on stainless steel and titanium watch parts.
Markets and events
Take it to fairs, markets and pop up stands. Carry it in one hand and plug into any outlet.
Technical specifications
20W JPT M8 specifications
Every source value below comes from the official JPT user manual for the YDFLP-20-M8-S-R. Download it with the button next to the SKU, or open the JPT M8 20W datasheet (PDF).
| Laser source | JPT YDFLP-20-M8-S-R (M8 series, MOPA) |
|---|---|
| Average output power | 20 W |
| Maximum pulse energy | 1.1 mJ |
| Pulse width | 2 to 500 ns, set independently from frequency |
| Repetition rate | 1 to 4000 kHz |
| Full power repetition rate | 23 to 4000 kHz |
| Beam quality (M²) | 1.4 typical |
| Central wavelength | 1064 nm |
| Emission bandwidth at 3 dB | Less than 15 nm |
| Output power instability | Less than 5% |
| Output beam diameter | 7.0 ± 0.5 mm |
| Power tuning range | 0 to 100% |
| Polarization | Random |
| Anti reflection protection | Yes |
| Red pilot laser | Built in |
| Cooling | Air cooled, no chiller |
| Source power consumption | Less than 120 W |
| Power adapter | Input 100 to 240 V AC, 50 to 60 Hz. Output 24 V DC, 160 W max |
| Control and connection | Built in marking control card, USB type C |
| Operating temperature | 0 to 40 °C |
| Storage temperature | -10 to 60 °C |
| Source module size | 272 × 105 × 76.2 mm |
| Source weight | 2.7 kg net |
| Laser source lifetime | Up to 100,000 working hours |
| Total machine weight | 9.9 kg |
| F-theta lenses | Two included, choose from 70×70, 110×110, 150×150 or 210×210 mm (210 mm is the largest field) |
| Rotary | Optional D60 for rings and bracelets or D80 for cups and bottles up to 70 mm |
| Upgrades | Sold as a complete configuration. 2.5D EZCad 3 and 3D heads are not available on this model |
| Software | EZCad 2 (LightBurn compatible) |
| Color marking | Yes, full MOPA color on stainless steel and titanium |
Pulse width and full power frequency
A MOPA source reaches its full 20W only above a certain frequency for each pulse width. Above that cut off frequency you get full power. Below it the source keeps its peak power and average power drops. Values from the JPT manual:
| Pulse width | Full power from | Max frequency |
|---|---|---|
| 2 ns | 240 kHz | 4000 kHz |
| 4 ns | 160 kHz | 4000 kHz |
| 6 ns | 120 kHz | 4000 kHz |
| 9 ns | 85 kHz | 4000 kHz |
| 13 ns | 65 kHz | 3000 kHz |
| 20 ns | 50 kHz | 3000 kHz |
| 30 ns | 46 kHz | 3000 kHz |
| 45 ns | 42 kHz | 2000 kHz |
| 60 ns | 38 kHz | 2000 kHz |
| 80 ns | 36 kHz | 2000 kHz |
| 100 ns | 34 kHz | 1000 kHz |
| 150 ns | 24 kHz | 1000 kHz |
| 200 ns | 20 kHz | 1000 kHz |
| 250 ns | 18 kHz | 900 kHz |
| 350 ns | 18 kHz | 600 kHz |
| 500 ns | 18 kHz | 500 kHz |
Buyer concerns answered
What buyers ask before purchasing
Is 20W enough power for what I need?
For surface marking, name engraving, color marking, and serial numbers on jewelry-scale items, 20W is plenty. The M8 source's high peak power compensates for the lower average power. If you need deep engraving as a daily workflow or thicker metal cutting, choose 60W or 100W instead.
Can it really do MOPA color marking?
Yes. The M8 architecture supports independent pulse width and frequency control, which is what creates colors on stainless steel and titanium. You can produce blacks, blues, golds, and oxidized rainbow effects exactly the same way as our larger M7 and M8 machines.
Will my standard outlet handle it?
Yes. The JPT source draws less than 120 W and the included adapter accepts 100 to 240 V AC, so it works on any standard residential or commercial outlet anywhere in the world. No special wiring, no dedicated circuit.
How portable is it really?
Very. The complete machine weighs 9.9 kg with no separate control box and no chiller, because the control card is built into the laser source. One person can carry it from a car to a market table. Plug in the adapter, connect your laptop by USB type C and start engraving within minutes.
What about software and learning curve?
EZCad 2 ships with the machine pre-configured. LightBurn compatibility is built in for users who prefer that interface. Most operators are running production-quality marks within the first afternoon. Lifetime email support at info@haotianlasers.com after warranty expires.
How does this compare to a 30W or 60W?
The 30W EM7 and the 60W EM7 best seller are bigger workshop machines with more power for deeper engraving and higher volume. The 20W M8 is the Haotian fiber laser made for the sales counter and portable use. Choose it when space and portability matter more than raw speed.
⚠ What this machine cannot do
- No 2.5D, 3D or large field upgrades. This model is sold as a complete configuration. The largest lens is 210 × 210 mm, and 2.5D EZCad 3 or 3D galvo heads are not available. For those options choose a 60W or larger machine.
- Not a deep engraving production machine. 20W will deep engrave but slowly. For deep engraving as a regular workflow choose 60W minimum, 100W sweet spot.
- Not a meaningful metal cutter. 20W can score very thin foil at best. For galvo cutting up to 1.5 mm steel, choose 100W or 120W. For sheet metal production use a CNC fiber laser cutter, not a galvo machine.
- Not a glass drilling production machine. The M8 architecture supports glass surface marking, but the 20W is too low-power for production glass drilling. For drilling holes through glass at production speed, choose the 100W, 120W or 200W M8.
- Not the right tool for tumblers and powder-coated drinkware. Fiber lasers cannot remove powder coating cleanly. For coated drinkware choose our CO2 galvo machines (40W or 60W).
- Not for wood, leather, or paper. Fiber wavelength does not interact with organic materials. For wood and leather, choose CO2.
- Not a sample testing service. We do not accept customer samples for testing. The five-feature breakdown above plus our material database covers what is realistic at 20W.
What ships with your 20W M8
Every machine ships complete and ready to run. Over $500 in included accessories.
- 20W JPT M8 fiber laser source (YDFLP-20-M8-S-R, built in control card)
- Galvo scanning head with red pilot laser
- Two F-theta lenses of your choice (70×70, 110×110, 150×150 or 210×210 mm)
- Optional rotary (D60 or D80)
- OD5+ safety glasses (1064 nm protection)
- Foot pedal switch (hands free triggering)
- EZCad 2 software (pre-configured, USB drive)
- LightBurn compatibility (configuration guide included)
- Power adapter (100 to 240 V input) and all cables
- Complete documentation and quick start guide
Warranty and shipping
What you get with every Haotian machine
3-Year Warranty
Full coverage on the JPT M8 source AND the complete machine. Industry-leading length for fiber laser warranty.
- Free replacement parts (non-source) shipped at no cost
- The broken part stays with you, no return required
- Source defects: Haotian pays both ways for JPT manufacturer warranty
- Lifetime email support after warranty expires
Free Shipping Worldwide
Built to order, shipped fast, all duties paid in supported regions.
- Free DDP shipping to US, Canada, and EU (approximately 30 days, all duties paid)
- Free CIF shipping worldwide (approximately 12 days, customer handles duties)
- Built to order, lead time included in shipping windows
- Tracked from factory to your door
Frequently asked
Common questions about the 20W M8
M7 is JPT's standard MOPA fiber laser line, used in our 60W EM7 best seller, 80W M7, 100W M7, 120W M7, 200W M7, and 350W M7. M8 is JPT's higher-spec line with optimized peak power and beam quality. M8 enables glass marking and glass drilling capabilities that M7 sources cannot do. The 20W, 50W, 100W, 120W and 200W M8 are the M8 series machines in the Haotian range. Buying M8 at 20W means you get the architecture advantage at the smallest size.
Production-speed glass drilling requires the water cooled 100W, 120W or 200W M8, which ship with the G3 PRO 2.5D galvo and EZCad3 software. The 20W M8 has the source architecture for glass interaction but not the power or scanning system for production drilling. It can do surface marking on glass (perfume bottles, wine bottles, awards, mirrors) which our M7 machines cannot do well at any power. Match the machine to the workflow.
A standard "name + date" engraving on a ring inside surface or watch caseback typically takes 30 seconds to 2 minutes depending on character size, depth, and material. For a busy jewelry counter that handles 20 to 50 personalization requests per week, the 20W M8 keeps up easily. For shops engraving hundreds of items per day, choose 30W EM7 or higher.
Yes. The 100 to 240 V universal voltage input means the machine runs anywhere in the world on a standard outlet. We ship Free DDP to US, Canada, and EU with all import duties paid. Worldwide shipping is Free CIF, which means you handle the local import duties (typically a few percent depending on country). Built to order, delivered in approximately 12 days CIF or 30 days DDP.
Yes. Unlike larger fiber lasers that ship as a tower plus a separate control cabinet plus a chiller, the 20W M8 is one integrated chassis. The laser source, galvo scanning head, controller, and worktable share a single housing. Total weight is 9.9 kg. You unbox it, plug it in, connect your laptop by USB type C, and start engraving. No assembly, no installation engineer needed.
The 20W M8 does not include a battery. The JPT source draws less than 120 W and the included adapter is rated 160 W maximum, so a portable power station rated 200 W or more can run it. We do not officially support battery operation, but the electrical profile makes it practical. For trade shows, most venues provide 110 V or 240 V outlets.
Surface marking and color marking on stainless steel, titanium, brass, copper, anodized aluminum, bare aluminum, tool steel, hardened steel, and most platings. Glass surface marking on borosilicate, soda lime, and quartz. Some plastics with MOPA short pulse widths. It cannot mark wood, leather, paper, acrylic, fabric, or coated tumblers. For those materials our CO2 galvo machines are the right tool. For PCB and medical device cold marking choose UV.
This model is sold as a complete configuration, so it does not take 2.5D, 3D or lenses larger than 210 × 210 mm. When you need more, the natural next step is the 60W EM7 best seller at $4,400 for faster metal marking and deeper engraving, or the 100W M8 for glass drilling. The 20W M8 keeps its value as a counter or market machine after a bigger laser joins the workshop. Many shops keep a 20W on the sales floor and a 60W or 100W in the back.
Ready to add personalization revenue to your shop?
Free DDP shipping to US, Canada, EU. Free CIF shipping worldwide. Built to order with a 3-year warranty on source and machine, plus lifetime email support.
Get a QuoteEmail info@haotianlasers.com for direct sales
Reviews
There are no reviews yet.